Main section Page top

Ticketing - 6. Dymo Printer setup (MAC)

It seems like much, but it takes aproximately 2 minutes.

There are text per image below.

Download the label printer software here.

1. Run the “DLS8Setup.8.5.2.dmg” to install the printer drivers and requiered software.

After instalation go to: 

2.Open Simple text. Write some dummy text in the document.

3. Chose print found under the file menu or click (CMD+P) Select Add printer from the printer dropdown

4. Select the Dymo 450 printer from the list, then click add. (Make sure your Dymo printer is pluged in the USB) 

5. Open the BadgePrinter, click settings. (If you have not installed it follow these steps.)

6. Select the ticket layout based on the labels you have bought, write down the size. i.e Dymo 99014 101x55mm

7. Go back to the print dialogue in the simple text document. Choose Manage Custom Sizes… from the Paper Size dropdown.

8. Click the + and give your custom size a name “Dymo 99014” and enter the sizes 101 x 55mm. Click OK

9. If you want both the custom sizes, go back to the BadgePrinter and get the other format and repeat step 7-8 with the other size. Dymo 11356 89x41mm

10. Go to the Printers dropdown, select Printers & Scanners Preferenes

11. In the Printers & Scanners Preferenes window Choose Default Printer Dymo LabelWriter 450 Shut the window to save.

12. Back in the print dialogue Select Presets and choose Save Current Settings as Preset

Now you are ready to start the badge printing good luck.

 

Good luck..

 

Search results

Page bottom